Binding:
Electronics
Brand:
Lopnord
EAN:
0742089443742
Label:
Lopnord
Manufacturer:
Lopnord
Model:
Size:
Warranty:
Powerbeats Pro Charging Case Compatible with iPhone and Android phone.
LED indicator:
Charging the case:
Red light on: Charging
Red light flashes: Insufficient battery
White light on: Open cover
White light flashes : Bluetooth pairing mode
How to pair the Powerbeats Pro with iPhone :
1.Open the Bluetooth on the iPhone. (When pairing, do not charge the Powerbeats Pro case or have a charging cable plugged in.
Please put the Powerbeats Pro case close to the phones so that the case can find the phone.)
2.Put the Powerbeats Pro into the case, open the lid, press the sync button until green light flashes.
3.Now the case is searching the phone, please do not close the case lid.
4.If the pop-up window shows "Not Your Powerbeats Pro", just ignore it, please do not click "Connect", otherwise the pairing will fail. When the window shows "Powerbeats Pro" or the name you set, please connect. When it shows "Done", do not click it. Firstly, press the sync button and close the lid. Then press "Done".
5.Open the case and wait for 2 seconds, when you see the Powerbeats Pro are paired with the iPhone, take them out and enjoy your music.
Q :Why I cannot sync the Powerbeats Pro after all the above steps.
A :If you tried all the above steps and still cannot pair the Powerbeats Pro, please fully charge the case and take out the Powerbeats Pro from the case, put them on the table for 4 to 5 hours for discharging. When the Powerbeats Pro are fully discharged and the chipset shut down, put them in the case, the chipset will restart. After charging in the case for a few minutes, try pair the Powerbeats Pro again.
Q :Why only one earbud has sound?
A :If only one earbud works, please put them into the case, close the cover for more than 10 seconds. Then open the cover and take out the Powerbeats Pro, both earbuds will work.