Binding:
Electronics
Brand:
PEMENOL
EAN:
0713721109272
Label:
PEMENOL
Manufacturer:
PEMENOL
Model:
Size:
5.5-30V to 0.5-30V
Warranty:
PEMENOL DC 5V 12V 24V timer relay module function with timing, delay and cycle control. With dual MOS output, digital tube display and reverse connection protection function, our timer relay board can be widely used at smart home, tndustrial control, automatic irrigation, indoor ventilation and protection equipment.
Parameters:
Input voltage: 5.5-30V (when the input voltage is 5V, the buck-boost can also be realized, but the voltage and current measurement is not accurate; when it is lower than 4.7V, the under-voltage protection will work)
Output voltage: 0.5-30V
Output current: up to 6A
Output power: 60W
Voltage display resolution: 0.01V, accuracy error 1%
Current display resolution: 0.001A, accuracy error 1%
Conversion efficiency: about 88%
Soft start: Yes (very large power load module may fail when started)
Power protection: 60W
Overcurrent protection: 6A
Working frequency: 180KHZ
Fan rotation conditions: current greater than 3A, or power greater than 20W, or temperature greater than 40 °C.
Size: 72*59*43mm
Mounting hole: diameter 3mm
Weight: 107g
Package:
1x Buck Boost Converter Module
Note:
1.The module input IN- is forbidden to be shorted to the output OUT-.
2.Please ensure that the power of the power supply is greater than the power required by the output load!
3.If the module wants full load output, the input voltage should be 8V or more. When the input voltage is 5V, the output power is about 15W, and the voltage ammeter fails.The maximum current value of the module is 4A, which is limited by the maximum output power. For example, the output is 17V, and the current should be no more than 2A. This module has an output short circuit protection function. After short-circuit protection, the module automatically turns off the output, and the module can be restored after power-on.