Binding:
Electronics
Brand:
DTech
EAN:
0714131653096
Label:
Guangzhou DTECH Electronics Technology Co.,Ltd
Manufacturer:
Guangzhou DTECH Electronics Technology Co.,Ltd
Model:
DT-6552
Size:
Warranty:
6-Foot FT232RL FTDI USB to TTL serial adapter cable for 3.3 V logic level serial communication (rx, tx and GND)
It is built with FTDI FT232 chip, FTDI's royalty-free VCP allow for communication as a standard COM port and D2XX 'direct' drivers provide DLL application programming interface; a great conversion data cord to meet with your needs of debugging, boot-loading, programming, etc.
NOTE: If any installation or usage issues, please email us or you may download a driver and usage guide on FTDI official website
The original FTDI chip is embedded in the USB-A end; 3 way 0.1" header connector with GND (ground), RX and TX at 3V3 logic level.
Applications:
Upgrading Legacy Peripherals to USB
Interface Microcontroller UART or I/O, FPGA / PLD to USB
Replace MAX232 type level shifters allowing for direct connection of products to PC
Industrial Control / USB Software / Hardware Encryption Dongles
Features
- The I/O pins of the FTDI wire are configured to operate at 5.0V logic level - Entire USB protocol handled by the electronics in the cable;
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity;
- Data transfer rates from 300 to 3M baud rate at TTL levels;
- Internal EEPROM with users writable area; - Supply voltage comes from USB bus, no external supply required;
- UHCI / OHCI / EHCI host controller compatible
Specific
Interfaces: USB 2.0 type A Male Port ; 3 pin Female Socket flying leads
Supports Windows 2008, XP and XP 64-bit, Vista and XP 64-bit, CE 4.2, 5.0 and 6.0; Windows 7, 8, 8.1, 10 (32 and 64-bit); Mac OS 8/9 , OS-X; Linux 2.4 and greater
What's Included
1 x USB to Serial TTL Level Converter Cable
1 X User Manual