Binding:
Brand:
SANSI
EAN:
6932336203050
Label:
SANSI
Manufacturer:
SANSI
Model:
C2440-JW-36W
Size:
36W Rectangle
Warranty:
SANSI 36W LED Motion Sensor Flood Light Outdoor
This light provides more safety to your home. It's a good replacement for 250W incandescent bulbs while only using 36Watts. This upgraded security light has 4 working modes, to perfectly satisfy your needs.
Four Working Modes
Test Mode
Light turns on for only 5 seconds during daytime or night once it detects motion. This mode is used for checking whether the sensor is working properly.
Motion Sensor Auto Mode
Light only works at night in this mode. It will light up for 1-10 minutes according to the time it has been set.
On-Time Mode
On-Time mode means that the light can work as a standard LED light without motion sensors. The Light works at daytime or night if you turn on the switch. The light will turn off after you turn the switch off.
Dusk to Dawn Mode
In this mode, the light automatically turns on at dusk or night and turns off at dawn or if it's too bright for your sensor.
Three Setting Knobs
Lux-Control Knob for Brightness Sensitivity
There's a Lux knob for brightness sensitivity, which can distinguish "brightness/daytime" and "darkness/night". So you can choose the best brightness sensitivity for you.
Time-Control Knob for Operating Time
The light can continuously illuminate for 1-10 minutes depending on your needs, whenever motion is detected. The minimum setting is 1 minute and the maximum setting is 10 minutes.
Range-Control Knob for Sensing Range
For setting the sensory range. Turn the knob counterclockwise to decrease the sensory range.
Attention
This light is IP65 waterproof, which makes it able to protect against low-pressure water jet spray but cannot be placed under water.
Before you mount and use the light, please read carefully the user manual. If you have any questions, please feel free to contact us, we will help you!