Binding:
Office Product
Brand:
NEX
EAN:
0735810363310
Label:
NEX
Manufacturer:
NEX
Model:
Size:
BSM505B
Warranty:
Product description:
1. Manual switch with double speed selection, variable speed foot pedal can adjust needle sewing speed.
2. The cuff can be sewed, with relevant ruler.
3. Replaceable press pin.
4. Have reverse sewing button.(When using reverse sewing, press and hold the reverse button to sew.)
5. Two start modes, start with manual button or pedal.
6. Use DC 6V 1200mA power supply or 4 "AA" batteries. (The battery is not included, please do not mix the old and new batteries.)
7. Can sewing 5 layers of ordinary thin denim, sewing thickness about 2.5mm.
Note:
1. Before using this product, please read the instructions carefully to avoid any problems caused by operation mistakes. (Please read the instructions carefully. If you don't understand anything, please contact us.)
2. Use the product before, please refer to the instruction on page 8, carefully check the threading steps is correct, and try to use the handwheel counterclockwise, on the right side of the test machine whether the line is smooth, restart the machine.
Special note:
1. The battery and power cord cannot be used together, otherwise the machine will be damaged.
2. Before sewing, please make sure to check the threading steps, make sure the sewing machine is in normal use, and then start the machine.
3. Before replacing the stitch, please make sure the needle is lifted and is in the highest position, otherwise it is difficult to change the stitch and even cause the needle to break.
4. When replacing the pin, make sure the pin is lifted and is in the highest position.
5. When replacing the machine needle, please make sure that the machine needle is lifted and is in the highest position. Note that the flat surface of the machine needle is facing the back of the machine and the machine needle must be installed in place.