Product Cover PEMENOL 5PCS OLED Display Module 128 x 64 OLED Display I2c 0.96inch Arduino OLED Display IIC Serial OLED Module with SSD1306 for Raspberry Pi and Microcontroller - White Light

PEMENOL 5PCS OLED Display Module 128 x 64 OLED Display I2c 0.96inch Arduino OLED Display IIC Serial OLED Module with SSD1306 for Raspberry Pi and Microcontroller - White Light

$22.99
$22.99
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
【CHANGEABLE IIC ADDRESS】: The built-in standard driver chip SSD 1306 already exists in the libraries of Arduino, Raspberry Pi and 51 Series,which makes programming very easy. This oled display arduino can be used with different machine easily.

【128 X 64 PIXELS】: With high resolution of 128 x 64 pixels,no need backlight and self-illumination, our OLED display Module 128x64 provides plenty of space for displaying elements.

【COMPATIBLE WITH MANY CONTROL CHIPS】: This oled display can be widely use with arduino, 51 series, MSP430 series, STM32/2, CSR IC, etc. 4PCS male pins makes the lightweight connecting easily.

【WIDE FIELD OF CLEAR VIEW】: 0.96inch OLED display module supports 180 degrees of view from up to down and right and left, which is convenient for you to clearly observe the information displayed from different angle.

【EASY TO INSTALL】: With four square holes, our I2C OLED display module can be installed easily, truly convenient to use and simple you working.

Binding:

Electronics

Brand:

PEMENOL

EAN:

0613635854063

Label:

PEMENOL

Manufacturer:

PEMENOL

Model:


Size:

5 Piece

Warranty:


PEMENOL 5PCS OLED Display Module can be wide use widely use with arduino, 51 series, MSP430 series, STM32/2, CSR IC, etc. With 128 x 64 pixels high resolution, no need backlight and self-illumination, providing 180 degree clear display. High contrast through the use of innovative OLED technology in the large 0.96 inch display!

Specifications:
- Color: white light
- Driver chip: SSD1306
- Interface Type: IIC / I2C-4PIN
- High Resolution: 128 * 64 Pixels
- Voltage: 3 V ~ 5 V DC
- Viewing Angle: almost 180 degrees
- Low power consumption : Full Screen 0.08 w
- Operating Temperature: -30 Celsius ~ 70 Celsius
- Many Control Chip Supports: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc

Pin Definition:
- GND: OLED Power Ground
- VCC: OLED Power Positive 3.3-5 V
- SCL: OLED IIC Clock
- SDA: OLED IIC Data Line

Note: OLED is self-luminous, no backlight needed! It does not respond when you just connect it to the mains, you have to program it and work properly, then it will display normally.