Wireless Remote Relay 12V 1 Channel RF Remote Control Switch, Momentary Contact Switch 433mhz Transmitter and Receiver, Saving Power DC3.7V-12V Wide Working Voltage
$10.99
$10.99
For Bulk orders
- Features
- Description
- Similar Items
【Advantage】Low power consumption, power saving.The remote relay switch adopts RF technology, stable signal. Resist Interference：It adopts non-directional wireless encoding technology, allowing independent control without mutual interference.
【3 different modes】we send Momentary mode default (that is, Press the Transmitter button , the receiver relay is ON; release the button, the receiver relay is OFF ). You can switch to 3 different modes as needed，Momentary / Toggle / Delay time.
【EASY and SAFE】The wireless remote control switch is easy to use and safety, .the Working Voltage: DC3.5V-DC12V; Max Load: 1A (have better Load less than 700ma) .Wireless control, Easy to Use，learn, relearn and control (please refer to introduction)
【SIGNAL 】You can use the transmitter (remote control) to turn the receiver on/off at any distance from a reliable location; 433MHz RF is available, RF signals can pass through wallsfloors and doors，steadily control receiver from any place within a reliable distance. Max range is up to 164ft/50m with no obstacle
【WIDELY USED】 : wide range of applications from simple domestic remote control to autonomous control such as battery power switch, remote controller, wireless controller,DIY, relay, buzzer, trumpet, circuit board etc. Warm Notice:Please email us if you meet any problem, we are always here to help, thanks!
【3 different modes】we send Momentary mode default (that is, Press the Transmitter button , the receiver relay is ON; release the button, the receiver relay is OFF ). You can switch to 3 different modes as needed，Momentary / Toggle / Delay time.
【EASY and SAFE】The wireless remote control switch is easy to use and safety, .the Working Voltage: DC3.5V-DC12V; Max Load: 1A (have better Load less than 700ma) .Wireless control, Easy to Use，learn, relearn and control (please refer to introduction)
【SIGNAL 】You can use the transmitter (remote control) to turn the receiver on/off at any distance from a reliable location; 433MHz RF is available, RF signals can pass through wallsfloors and doors，steadily control receiver from any place within a reliable distance. Max range is up to 164ft/50m with no obstacle
【WIDELY USED】 : wide range of applications from simple domestic remote control to autonomous control such as battery power switch, remote controller, wireless controller,DIY, relay, buzzer, trumpet, circuit board etc. Warm Notice:Please email us if you meet any problem, we are always here to help, thanks!
Binding:
Tools & Home ImprovementBrand:
BWSSEAN:
0703931473911Label:
BWSSManufacturer:
BWSSModel:
Size:
Momentary RelayWarranty:
Product Description
Working Voltage:DC3.7V-DC12V
Wide Range Working Voltage DC3.7V 4.5V 5V 6V 9V 12V
Max Load:1A (have better Load less than 700ma)
Standby current 0.2mA
Relay Working Current: 20-30ma
Size:0.9inch*0.43inch*0.31inch
Working Mode: Momentary/ Toggle / Delay time adjustable
Encoding Type:Learning Dot to add Transmitter
Normally Open Port (NO) Common Port (COM)
Input DC3.7V-DC12V Output 0V Switching Value
Working way
Momentary---Press the Transmitter button, the receiver relay is ON, release the button ; the receiver relay is OFF
Toggle---Press transmitter button for 1 time , the receiver relay is ON, press the button again, the receiver relay is OFF
Delay time---Press remote control button, the corresponding relay actuates and keeps working until the time out.(5S)
Learning Code:
Input 12V for the Receiver , Connect the Learning Button, The receiver Led indicator ON. Press remote button 1 time, Led indicator flash for 1 times , Then Press remote button 1 time , Led indicator flash for 1 times again , it mean learning successfully
★Toggle : Connect the Learning Button . Until the receiver Led indicator flash for 1 times, it mean Change successfully.
★Momentary: Connect the Learning Button . Until the receiver Led indicator flash for 2 times, it mean Change successfully.
★Delay time : Connect the Learning Button . Until the receiver Led indicator flash for 4 times, it mean Change Delay time successfully.
Package Include:
1 x Receiver
1 x Transmitter(with instructions)