Product Cover YOSUN V13H010L71 Projector lamp Bulb for Epson ELPLP71 BrightLink 475Wi 480i 485Wi PowerLite 470 475W 480 485W eb-475wi eb-485wi BrightLink 1410Wi Replacement Projector Lamp Bulb

YOSUN V13H010L71 Projector lamp Bulb for Epson ELPLP71 BrightLink 475Wi 480i 485Wi PowerLite 470 475W 480 485W eb-475wi eb-485wi BrightLink 1410Wi Replacement Projector Lamp Bulb

$73.99
$73.99
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
YOSUN 100% new replacement Projector lamp bulb with same functioning as your original one.

Features: It is the lamp with housing, not only a bare bulb. Same as bright and durable lamp as the original bulb.

Compatible Models : fit for Epson ELPLP71/V13H010L71 Powerlite 470 475W 480 485W, BrightLink 475Wi 480i 485Wi, EB-470 475W 475Wi 480 480E 485W 485Wi 1410Wi 1400Wi Projector

Installation and safty : You will find it is quite easy to install it into your Projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well.

Warranty and return : New replaced lamp will be shipped to you when your bulb was out of work naturally in 180 days. Refundable issue, please contacts our 24 hours/7 days customer service. It is our appreciations if you need any further assistance.

Binding:

Electronics

Brand:

YOSUN

EAN:

7053465079367

Label:

YOSUN

Manufacturer:

YOSUN

Model:

ELP-LP71

Size:

ELP-LP71

Warranty:

90 Day

Parameter:

YOSUN new replacement Projector bulb with housing.
Perfect match is only applicable to your correct Projector model.
Lamp Life: 3000-4000 hours

COMPATIBLE MODULES:

fit for Epson ELPLP71/V13H010L71 Powerlite 470 475W 480 485W, BrightLink 475Wi 480i 485Wi,
EB-470 475W 475Wi 480 480E 485W 485Wi 1410Wi 1400Wi Projector

Warm Noted:

Be sure to use an ELPLP71 Projector Lamp for replacement.
Be sure to turn off the unit and unplug the power cord before replacing the lamp
The lamp remains hot after the unit is turned off with the TV.
If you touch the lamp, you may burn your fingers. When you replace the lamp
Wait for at least 0.5 hour for the lamp to cool. Do not touch the surface of the lamp
If you touch it, wipe off the fingerprints with a soft cloth

Installation:

1. Turn off the Projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover.
3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.