BestBuyZone
Product Cover Quick sense 180` Wall-Mount PIR Motion Switch with Light, Energy Saving Sensor Lux Adjustment Set of 2

Quick sense 180` Wall-Mount PIR Motion Switch with Light, Energy Saving Sensor Lux Adjustment Set of 2


  • Features
  • Description
  • Similar Items
Customer Care : Whatsapp 9560248290

Good solution for energy saving & easy in installation. & Delay adjustment: 10 Seconds - 7 Minutes & Adjustable Lux: turn on the lights during the day or night.

Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights .

Sensitivity Adjustable: Turn On Lights during Day or nights.

It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance

Binding:

Kitchen & Home

Brand:

Quick Sense

EAN:


Label:

Quick Sense

Manufacturer:

Quick Sense

Model:

QS-07

Size:

Wall PIR(Set of 2)

Warranty:

18 Months

QUICK SENSE INNOVATIONS: 9560248290(Customer care)


Use:
Home, Office, Shops, Hospitals, Hotelas, Bathroom, Corridor, Step, Parking area & etc 

QUALITY CONTROL STANDARDS: 
Operating Volt: AC 220-250V 50Hz-60Hz. 
Load power: Upto 300/1200W Max
Ambient Light: 3-2000 (Adjuestable)
Load type: Incandescent lamp, LED light, CLF, fans, etc
Detecting distance: 10~12 Mtrs(Dept temp) 
Detecting Angle: 180 Degree. 
Installtion Hight: 2.2-4 Mtr 
Motion Detetion Speed: 0.6~1m/s
Power Cusumption:0.1W (static) & 0.4(Work)
Working Humidity: less than 93%RH
Delay: 10 Seconds -7 Minutes (Adjustable) 

PRODUCT INSTALLATION:
1.Keep Sensor unit 1.6 Mtr higher from the ground level.
2. The light, such as incandescent lamp which emits high heat should be kept from the switch aways, or it will be turn on/off voluntarily.
3. On being fixed to the wire first time, the switch' initialization will take 1-2 minutes. It's natural for the switch to turn on/off voluntarily.
4. When you install the switch on daytime, the Default State of the switch will make the light off.Keep the detector of the switch from illumination, & then the light will turn ON. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity.

PACKAGE INCLUDES:
1 x Infrared Switch Board
1 x Installation Manual 
2 x Mounting Screw 
Bill 
Best Technical Support after Selling.