BestBuyZone
Product Cover Zircon Stud Finder DIY/Pro StudSensor A100 Wall Scanner; StudScan Detects Edges of Wood/Metal Studs at 3/4

Zircon Stud Finder DIY/Pro StudSensor A100 Wall Scanner; StudScan Detects Edges of Wood/Metal Studs at 3/4" DeepScan Detects Wood/Metal to 1 1/2" Alerts Presence of Live, Unshielded AC Wire US Model

$22.99
$19.54
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items

Binding:

Tools & Home Improvement

Brand:

Zircon

EAN:

0042186693317

Label:

Zircon

Manufacturer:

Zircon

Model:

69331

Size:

Edge Finding

Warranty:

1 Year limited
The StudSensor A100 is Zircon’s newest edge locating electronic stud finder that is sold exclusively on Amazon. The A100 is designed with a smooth, ergonomic rubber grip allowing for a comfortable yet secure hold for any size hand, at any angle. This stud finder uses the most recent technology in density detecting software and circuitry. The scanner has 2 scanning modes to locate the edges of wood and metal studs and joists behind walls, floors, and in ceilings up to 1.5 inches (38 mm) deep. In StudScan Mode, the SS A100 locates the edges of shallower wood or metal studs up to 0.75 of an inch (19 mm) deep. Switch over to DeepScan Mode to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a Wire Warning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using either stud scanning modes. Finding studs using this edge finding tool is simple. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The easy-to-read LCD will alert you as the stud detector approaches the edge of the stud in both scanning modes. Once the edge is detected, the patented arrow-shaped SpotLite Pointer will shine, the translucent base will illuminate, and an audio tone will sound. DO NOT DRILL HERE! Instead, mark the spot in the “V’ marker groove at the head of the tool and continue past the stud. Repeat the process in the opposite direction and mark the opposite edge of the stud. The center of the stud is midway between the two marks. Make sure to note whether the Wire Warning Detection is alerting you to live, unshielded AC wiring before drilling between the two marks into the center of the stud. With the Zircon StudSensor A100, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.