Binding:

Brand:

EAN:

Label:

Manufacturer:

Model:

Size:

Warranty:

You can now turn your M.2 NGFF SSD drive into a 2.5-inch SATA III or External USB 3.0 Enclosure with the Sabrent EC-M2CU.
Exclusively designed for M.2 NGFF SSD B or B+M Key supporting 2242 (42mm), 2260 (60mm), and 2280 (80mm) size drives.
Slim Aluminum casing, Plug and Play no driver install required.

Note: It doesn’t support M.2 PCIe NVMe or M.2 PCIe AHCI, Pls check your M.2 SSD type before place order.

● Compatible with M.2 NGFF SSD and SATA-enable host devices such as Desktop & Laptop computer systems and Hot Swap 2.5'' SATA Bays.
● Convert an m.2 NGFF solid-state drive into a USB 3.0 or a Standard 2.5in SATA III 6Gbps SSD.
● This is backwards compatible with USB 2.0 and 1.1 with their transfer speeds.
● Exclusively designed for M.2 NGFF SATA SSD B or B+M Key.
● Added protection for your SSD with enclosed housing.
● Support M.2 from factor: 22x42, 22x60, 22x80.
● System performance maximization.
● Plug and play no drivers required.
● Standard SATA 22pin connector.
● B & B+M Key compatible.

Setup instructions:
1. Pull on the plastic piece to open the enclosure.
2. Connect your M.2 SSD B or B+M Key drive into the board.
3. Screw the drive in.
4. Close the case.
5. Screw in the sides.
6. Connect the USB 3.0 cable to the enclosure and to your computer.

Package Contents:
● mSATA to SATA 2.5 enclosure
● Micro USB 3.0
● Screws + Screw Driver
● User manual