IZOKEE 0.96'' I2C IIC 12864 128X64 Pixel OLED LCD Display Shield Board Module SSD1306 Chip 4 Pin for Arduino for Raspberry Pi (Pack of 3pcs, Yellow-Blue-IIC)
$14.99
$14.99
For Bulk orders
- Features
- Description
- Similar Items
0.96" SSD1306 128X64 OLED LCD Display with IIC/I2C Interface-4PIN.
Due to the high resolution of 128 x 64 pixels, the display offers a lot of space to display elements!
Easy connection of the display with Arduino, Raspberry Pi, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.. Only through I2C interface via four pins!
The IIC address can be changed. Thanks to the standard driver chip (SSD 1306) libraries already exist for Arduino, Raspberry Pi and 51 Series, which makes programming very easy!
Multiple choices: I2C IIC (4Pin) or SPI (7 Pin) interfaces and three different Colors (Yellow Blue/ White/ Blue) for your option.
Due to the high resolution of 128 x 64 pixels, the display offers a lot of space to display elements!
Easy connection of the display with Arduino, Raspberry Pi, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.. Only through I2C interface via four pins!
The IIC address can be changed. Thanks to the standard driver chip (SSD 1306) libraries already exist for Arduino, Raspberry Pi and 51 Series, which makes programming very easy!
Multiple choices: I2C IIC (4Pin) or SPI (7 Pin) interfaces and three different Colors (Yellow Blue/ White/ Blue) for your option.
Binding:
Personal ComputersBrand:
IZOKEEEAN:
0760960527602Label:
IZOKEEManufacturer:
IZOKEEModel:
IZKE31-IIC-YB-3Size:
Warranty:
Specifications:
Super High Brightness (Adjustable)
Super High Contrast (Adjustable)
Interface Type: IIC / I2C-4PIN
0.96 inch OLED display chip: SSD1306
High resolution: 128 * 64 Pixel
Voltage: 3V ~ 5V DC
Viewing angle: greater than 160 degrees
Support many control chips: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
How to connect?
GND: OLED Power Ground
VCC: OLED Power Positive 3.3-5V
SCL: OLED IIC Clock Line
SDA: OLED IIC Data Line
Question: Why the resolution appears to be 128x32, not 128x64?
Answer: When you use 128x64 pixel display, you should comment the default display type #define SSD1306_128_32 and uncomment #define SSD1306_128_64 at line 73 and 74 of the driver header file Adafruit_SSD1306.h. Then the 128x64 pixel can be displayed normally.
Note:
OLED is self-luminous, no backlight! It will not have any reaction if you only connect it with power supply. You must program it and operate correctly, then it will display normally.
Package included:
3* 0.96 Inch I2C OLED Display