25Mx20mmx0.15mm Thermal Adhesive Tape,High Performance Thermally Double Side Tapes Cooling Pad Apply To Laptop Heatsink,LED,IGBT,Computer CPU Fan,GPU Cooler,Modules,MOS Tube,SSD Drives
- Features
- Description
- Similar Items
Aikenuo thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.
Thermal double-sided tape has a thermal conductivity of only 1.5 W/mk, Can't provide good cooling results, If you need high thermal conductivity products, Please search (B074W99H6R), This is our highest thermal conductivity product, Its thermal conductivity is 6.0 W/mk, It is the highest specification thermal pad on the market, but it is not very sticky, You can use these two different items together.Our products also include Silver Thermal Compound Grease Paste.
Binding:
ElectronicsBrand:
AI AIKENUOEAN:
1145702700090Label:
AikenuoManufacturer:
AikenuoModel:
Size:
0.15mm ThicknessWarranty:
Specification:
Dimension: 20mm x 25m (Width x Length)
Glass fiber thickness: 0.15mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 5KVAC
Thermal impedance : 0.3℃in2/w
Initial Adhesion: 1.5kg/inch
180°Adhesion power: >18 N/25mm
Applicable temperature range:-30~+150 °C
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long,
normal temperature (30~+150 °C ) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength,
That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion,
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape