♦ 20 Pieces LED strip gapless connector; 4 Pin conductor for 10 mm wide 5050 RGB LED strip - non-waterproof. Please make sure that you put the led strip under the pins and not on top. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side.
♦ Make LED strips turn easily; Avoid twisting and damaging the LED strip. They are not like some cheap thin plastic kind. They are made from premium PVC material,heat resistant,Anti-burning,No Fire Hazard.
♦ Compatible with: Provide solderless,gapless and seamless connection for Both Waterproof and Non-Waterproof SMD5050 RGB LED strip lights. Not for SMD3528 RGB LED strip lights.
♦ Good Performance: Connect between two 5050 LED strip sections to bypass/bend around a corner,curve,angle or gap,making connection natural and beautiful. Locks the led light strip very tightly. 4-Pin LED Light Strip Connector better than the corner connectors because you don't waste space with the wires that connect them, the two strips literally join together right at this connector.
♦ Easy Installation: No need to solder. Open the wire clip.It should snap open with just a little effort.Insert your 10mm LED light strip inside the clip underneath the two contact prongs,making sure the side of the strip aligns with the symbol.Close Snap the wire clip shut. Gently pull on the wire to confirm you've secured the strip inside the connector.If you need to solder it with light strip cable,you had better use less tin in order to avoid short circuit.