RGBZONE 10 Pack RGB 4Pin LED Strip Connector for 10mm Waterproof RGB 5050 LED Strip,Quick Strip to Wire Connector Without Stripping Wire
$15.99
$15.99
For Bulk orders
- Features
- Description
- Similar Items
Connect strip to wire without stripping insulation, no soldering, quick and flexible connection.
Work for waterproof 10mm width 5050 RGB 4 pin led strip light, suit for 22-20 AWG Solid Wire / Strand Wire.
Compatible with 5v, 12v, 24v led strips, support up to 5A current carrying, allow you to connect longer LED strips by one connector.
DIY led strip to wire connection length you want, no mater strip-to-wire extension or strip-to-strip jumper, free from the limit of terminal position.
The pin pierce wire insulation and led strip pcb at both end in order to connect and fix them, no more worry strip light or wire moving out of connector.
Work for waterproof 10mm width 5050 RGB 4 pin led strip light, suit for 22-20 AWG Solid Wire / Strand Wire.
Compatible with 5v, 12v, 24v led strips, support up to 5A current carrying, allow you to connect longer LED strips by one connector.
DIY led strip to wire connection length you want, no mater strip-to-wire extension or strip-to-strip jumper, free from the limit of terminal position.
The pin pierce wire insulation and led strip pcb at both end in order to connect and fix them, no more worry strip light or wire moving out of connector.
Binding:
KitchenBrand:
RGBZONEEAN:
Label:
RGBZONEManufacturer:
RGBZONEModel:
FB1142Size:
4 PIN Strip to WireWarranty:
Specifications:
Material: Plastic
Rated Voltage: <300V
Rated Current: <10A
Pin Quantity: 4 pin
Workable Wire Gauge: 20-18AWG
Workable PCB Width: 10mm
Workable PCB Thickness:0.3~0.35 mm
Working Ambient TEMP.: -20~50℃
Application:
1. 10MM wide 4 PIN STANDARD WATERPROOF rgb LED Strip Light.
2. 20-18awg 4 conductor extension wire
Note: This connector(AC-DJ-N10XB-420) NOT for SILICONE waterproof coating LED strip light. If you have this kind of led light strip, pls use this item(AC-SE-N10XB-4) (ASIN:B01MU7FKUK) which is still workable without stripping waterproof layer.
Installation TIPS:
Strip End Connection:
1. Cut the strip straight perfectly, then fully open the clip(up to 90 degrees).
2. Push the strip in until it hits the backing, and pins on the connector make contact, the fully close with nose pliers!
Wire End Connection:
1. Have to be separated the 4 wires before you insert them into the connector.
2.Required to press down with nose pliers to ensure the contacts pierces through the insulation on the wire.
3. reminder: no stripping of the wires. Just be sure polarity nodes are matched up "+" to "+" and "-" to "-".
Package Included:
10 x Strip to Wire Connectors