uxcell Diamond Coated Glass Hole Saw Drill Bits for Ceramic Tile Marble Rock Porcelain 90mm
$11.17
$11.17
For Bulk orders
- Features
- Description
- Similar Items
SIZE - 90mm(3.5-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter.
DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.
NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance.
SPECIAL DESIGN - Slotted edge makes it more sharp, works more efficient. Side open can remove the waste to keep the drill bit clean.
APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp.
NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance.
SPECIAL DESIGN - Slotted edge makes it more sharp, works more efficient. Side open can remove the waste to keep the drill bit clean.
APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
Binding:
Misc.Brand:
uxcellEAN:
0601382490061Label:
uxcellManufacturer:
uxcellModel:
a16121200ux1040Size:
90mmWarranty:
1.Cutting tip with AAA Grade diamond particles coated offers sharp cutting, the efficiency of cutting will be improved greatly.
2.Nickel plated. make it more durable than the general hole saw,segmented design works better and lasts longer.
3.Specifically for glass openings.excellent results in tile.
4.Cut holes smoothly, tidily, with out broken edges and vibration phenomenon.
5.Small incision resistance, increase the speed of cutting holes, easy to decorate after grooving and easy to clean.
Attentions:
1.This glass hole saw needs to be used at a low speed, about 800-1000r per minute.
2.In order to prolong the life of this glass hole saw, when processing, please add into coolant liquids or water.
3.Working without cooling is forbidden.
4.Please start your hole diagonally, make a round trace and then hold drill straight.
Specifications
Product Name: Glass Hole Saw
Package Content: 1 x Glass Hole Saw
Main Color: Silver Tone
Material: Metal,Diamond Particles
Coating: Nickel Plated
Speed: 800-1000/RPM
Weight: 171g
Diameter: 90mm/3.5-inch
Shank Size: 10 x 25mm/0.4-inch x 0.98-inch(D*L)
Total Length: 60mm/2.4-inch
Side Hole Size: 15 x 8mm/0.6-inch x 0.3-inch(L*W)