BestBuyZone
Product Cover Inkjet Printers Printhead Cleaner for WF-7720 WF-7710 WF-7610 WF-7620 WF-7110 WF-2660 WF-2630 WF-2760 WF-2750 WF-3640 WF-3620 WF-2650 XP-430 XP-330 XP-420 XP-410 XP-220 XP-320-3.4oz Cleaning Kit

Inkjet Printers Printhead Cleaner for WF-7720 WF-7710 WF-7610 WF-7620 WF-7110 WF-2660 WF-2630 WF-2760 WF-2750 WF-3640 WF-3620 WF-2650 XP-430 XP-330 XP-420 XP-410 XP-220 XP-320-3.4oz Cleaning Kit

$14.99
$14.99
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
To solve illegible marking caused by print head clogging (vertical stripes, horizontal stripes, text printing or incomplete patterns.)

It contains high-performance ingredients such as active enzymes, strong cleaning, environmentally friendly and would not corrode the print head.

80-90% success rate with a $13.94 refund if it doesn't work(Depending on the length of inactivity of your printer will determine the effectiveness of this product.), Need not to disassemble the print head with simple operation.

It applies to OEM/factory ink, dye, pigment, sublimation ink, heat transfer ink and alike.

For printer models:XP-220 XP-320 XP-324 XP-420 XP-424 XP-310 XP-314 XP-410 XP-100 XP-200 XP-300 XP-400 XP-330 XP-430 XP-434 WF-2510 WF-2520 WF-2530 WF-2540 WF-7620 WF-7610 WF-3640 WF-3620 WF-2630 WF-2650 WF-2660 WF-2750 WF-2760

Binding:

Electronics

Brand:

CoYlBod

EAN:

0755170756317

Label:

CoYlBod

Manufacturer:

CoYlBod

Model:

8541628141

Size:


Warranty:


Directions:
1. Heat the cleaning fluid.
2. Print the "nozzle checking" test page to confirm the color to be cleaned.
3. Pick out the ink cartridge.
4. Inject the cleaning fluid into the print head that needs cleaning with a syringe, and wait for 10-12 hours,as shown in Figure 3.
5. Install the ink cartridges and run the "nozzle cleaning" function twice in printer driver.

After cleaning, if the clogging is more serious, maybe it's because the cleaning liquid hasn't been totally discharged and still stays inside the print head. Please follow the following steps:
1. If you have the refill ink for this printer, you can inhale ink 4ML with a syringe and inject it into the ink inlet of the print head, then install the cartridge and run the driver's "Print head cleaning" function 1 times.
2. If you do not have the refill ink for this printer, you can use an empty syringe (do not need to inhale anything)to connect with the ink inlet of the print head, repeatedly push and pull the plunger of the syringe to discharge the cleaning liquid. Then install the ink cartridge, and run the driver "print head cleaning" function 1 times.
3. If there is no improvement, you will need to wait 2 hours and try again to run the driver's "Print head cleaning" function 1 times. The above methods can be tried several times.

P.S.:More detail instructions and tools are included in the package.

Package content:
3.4 oz Printhead Cleaning Fluid
1×Syringe(10ML)
1×silicone tube
1×instruction manual

Cautions:
It may not work for serious clogging or when there is insoluble material inside the nozzle. You need to replace a new print head to solve the problem.