CB09 CB09U Graphtec Cutting Blade Holder with 15pcs top quality Vinyl Cutter Plotter Cutting Blades For Silhouette 30/45/ 60 Degree (Each degree 5pcs)
$18.99
$18.99
For Bulk orders
- Features
- Description
- Similar Items
Materials with ultra - hardness, carbide, super - toughness, longer wear and edge grinding with ultrafine polishing, edge more.
The top quality of the blade, not ordinary , there's a marked difference.Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief.
30°blades are predominantly used for cuting very thin window tint and mylar materials.
45°blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calandered vinyls as well as other thin materials such as ThermoFlex Plus.
60°blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist.
The top quality of the blade, not ordinary , there's a marked difference.Suitable for polishing wood, pvc mahogany color, precision, MDF and other relief.
30°blades are predominantly used for cuting very thin window tint and mylar materials.
45°blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calandered vinyls as well as other thin materials such as ThermoFlex Plus.
60°blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist.
Binding:
Misc.Brand:
Qi MeiEAN:
0712179551459Label:
Qi MeiManufacturer:
Qi MeiModel:
8541730809Size:
Warranty:
Specifications:
Material: hard alloy
Diameter(Outer): approx.11.5mm/0.45"
Diameter(Inner ): approx.1.5mm/0.059"
Length(Clamp to down): approx.33mm/1.29"
Length of holder: 51.8mm
Package Include:
1*Blade holder
5*30 Degree Blades
5*45 Degree Blades
5*60 Degree Blades
Suitable for: Plotter cutter.
Notice:
Blade should not extend too long,generally within half a millimeter is better, while paying attention to extended balde longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
When the word carved with angular phenomenon,you should change the blade to eliminate the problem,if the phenomenon persists after change blade, it should be the holder problem.
When problem arise the blade holder,try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.