DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Module with 4PIN Base Board for Arduino UNO R3 Mega 2560 Nano
$9.99
$9.99
For Bulk orders
- Features
- Description
- Similar Items
Low Energy: With HM-10 bluetooth 4.0 module, you can add Bluetooth features to your project and support iphone4s or later.
DSD TECH Brand 4pin Base Board: Through this base board, leads to VCC, GND, TX, RX. You can be very convenient to connect to your arduino project
Led status indication: when the connection is established will always light, disconnection is flash
iBeacon Support:You can make this module into ibeacon mode.So you can have your own ibeacon.it also Supports Apple Notification Center Service (ANCS)
working voltage 3.6 V to 6V,Default rate of 9600. DSD TECH back this Bluetooth 4.0 LE module with ONE Year WARRANTY. If you meet any question, please contact us, we will fix your issue within 24 hours.
DSD TECH Brand 4pin Base Board: Through this base board, leads to VCC, GND, TX, RX. You can be very convenient to connect to your arduino project
Led status indication: when the connection is established will always light, disconnection is flash
iBeacon Support:You can make this module into ibeacon mode.So you can have your own ibeacon.it also Supports Apple Notification Center Service (ANCS)
working voltage 3.6 V to 6V,Default rate of 9600. DSD TECH back this Bluetooth 4.0 LE module with ONE Year WARRANTY. If you meet any question, please contact us, we will fix your issue within 24 hours.
This is a Bluetooth 4.0 module with 4pin base board that can support iphone4s or later.
But does not support the version is lower than the android 4.3 phone(it don't support classic bluetooth 2.0 spp features)
The core module is HM-10
Base board from DSD TECH
Operating voltage: 3.3V to 6V
About APP
We provide a free app for this module for you to test and use.
Search for "DSD TECH Bluetooth", which you can find in appstore and google play.
How to Enable Apple Notification Center Service (ANCS) ANCS function
1.1 Please read apple notification ducument first
1.2 Send AT+TYPE3 command change to AUTH and BOND mode.
1.3 Send AT+ANCS1 command to open ANCS.
1.4 Send AT+PASS[para1] command to set passcode. Default passcode is "000000"
1.5 Send AT+RESET to restart module.
Now you can use LightBlue to scan and made a connect with module.
iOS will ask you input passcode. please input your passcode value.
If all is okay, you should receive AT+ANCS[para1] command from module UART.
About HM-10 Module
Core module is the original HM-10 module, not fake. DSD TECH brand guarantees and we accept refund without any excuse.
WARRANTY
We back this item with ONE YEAR WARRANTY. If you meet any question, please contact us, we will fix your issue within 24 hours.