BestBuyZone
Product Cover T.R.U. AF-20R Heat Shield Resistant Aluminum Foil Tape: 4 in. wide x 50 yds. (2Mil)

T.R.U. AF-20R Heat Shield Resistant Aluminum Foil Tape: 4 in. wide x 50 yds. (2Mil)

$28.80
$28.80
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
3.6 Mil Aluminum Foil: 1.6 mils (adhesive) + 2 mils (carrier) - 3 in. Core

Resist water vapor, some chemicals, flame, moisture, weather and smoke transmission.

Acts as a vapor barrier to insure the integrity of the insulation system

Thermal conductivity helps cooling and heating efficiency, improving efficiency in systems

Conformable backing and pressure sensitive rubber adhesive adheres to a variety of smooth or irregular surfaces

Binding:

Office Product

Brand:

GGR Supplies

EAN:

0763684083645

Label:

GGR Group

Manufacturer:

GGR Group

Model:

AF-20R

Size:

4" in. x 50 yds.

Warranty:


Aluminum Foil Tape with Liner

Product Description
T.R.U. AF-20R Aluminum Foil Tape is a 2 Mil dead soft premium grade Aluminum Foil coated with an extremely aggressive synthetic rubber adhesive that provides a tight positive grab when smoothed on work surfaces; its malleable foil conforms well to irregular and curved surfaces. The T.R.U. AF-20R Aluminum foil tape is an all-weather general purpose used in fiberglass duct board systems (on seams and joints to maintain the integrity of the vapor barrier) and on FSK systems.

Applications
For heat reflection and dissipation - Masking in paint stripping and electroplating - Cover over and seal seams in Hexayurt shelters - Waterproof sealing - Sealing plastic and automation plateware (in biotech research).

Properties
• Adhesive: Synthetic Rubber
• Thickness: 3.6 mils (carrier[2.0] + adhesive[1.6])
• Release Liner: Paper
• Adhesion: 91 oz/in (to stainless steel test panel)
• Tensile Strength: 17.1 lbs/in.
• Elongation: 3.5%
• Temperature Resistance: -4 F to 176 F
• Core: 3 inch diameter

Alternative to Ideal #488; Polyken #337; Venture #3530; Shurtape #AF973; Fasson #0802; Tesa #53900.

Note: Sizes will be the tape industry standard metric sizes, ex. 12mm for every 1/2 inch of nominal value tape width (Rolls are give or take 5% wider or narrower than the nominal size).