Product Cover Touchpad Trackpad Screw for MacBook Pro Unibody A1278 A1286 2009 2010 2011 2012 A1342

Touchpad Trackpad Screw for MacBook Pro Unibody A1278 A1286 2009 2010 2011 2012 A1342

$5.99
$5.99
For Bulk orders
Quantity


  • Features
  • Description
  • Similar Items
If a MacBook Pro trackpad stopped clicking there are a few things you can try to troubleshoot and repair the problem.This could be related to:1. Failing (swollen) battery.2. Wrongly adjusted trackpad screw.3. Failed trackpad.If you are sure you MBP 13.3 is cased by trackpad , replace it,Such as Cracked, Broken

Mackbook Pro trackpad Adjustment screw, Philips screws secure the trackpad to the under belly of the top case. T5 screw sets how much play, or give, the trackpad has when you press it down. In other words, you use this screw to calibrate how far the trackpad is depressed when you perform the click action.

USED ,NOT NEW!!! Package: One set screws & springs without Screwdriver (Include 2* trackpad springs + 8*1.6 millimeter Philips tiny screws + 1* 1.4 millimeter T5 trackpad button adjustment screw)

Make sure the serous printed on you bottom before order. fit for A1278 A1286 2009-2012, A1297 2010-2012, A1342 but not fir for 13" A1278 2008; 15" A1286 2008; 17" A1297 2009

Special tools are necessary but not included - Phillips #00 screwdriver (to remove ten screws securing the lower case to the upper case and touchpad screw)T6 Torx screwdriver( to remove six screws securing fan to the logic board and nine screws mounting the main board)?Tri-wing screwdriver (to remove two Tri-wing screws securing the battery to the upper case)

Binding:

Electronics

Brand:

INYES

EAN:

0889743359862

Label:

INYES

Manufacturer:

INYES

Model:

CMBLS006

Size:


Warranty:


Attention during Replacement

This is where most people had the same problems:  couldn’t get the set depth right.  If you screw it in too far then there’s no give but too much means it doesn’t work right either. You may had to reassemble and disassemble three times to get this perfect.
Something you wish you did before removing the old screw from the old top case was noting how far it was screwed in.  taken a picture first so I knew how far to screw in the new T5 on the new top case.  Don’t make that mistake.
While removing the four tiny screws, support the trackpad on the bottom with your fingersavoiding dropping off
Turning the screw counterclockwise will loosen the trackpad.
Turning it clockwise will  tighten the trackpad.
Make sure all gaps between the trackpad and palm rest are equal.
Replacement Guide :http://www.inyes.org/2016/02/11/macbook-pro-trackpad/

Compatibility

All Mid 2009- mid 2012 13" A1278 Unibody MacBook Pros

(mid2009 mb990 mb991; mid2010 mc374 mc375; early 2011 mc799 mc724; late 2011 md313 md314; md2012 md101 md102)

All Mid 2009 - mid&nb