MAX WATTAGE: 72W max wattage, these connectors can use low wattage and high wattage light strip.

FIREPROOF MATERIAL: They are not like some cheap thin plastic kind. They are made from PBT material, heat resistant, Anti-burning, No Fire Hazard.

GOOD PERFORMANCE: Locks the led light strip very tightly. 4-Pin LED Light Strip Connector better than the corner connectors because you don't waste space with the wires that connect them, the two strips literally join together right at this connector.

EASY TO USE: Open the wire clip. It should snap open with just a little effort.Insert your 10mm LED light strip inside the clip underneath the two contact prongs, making sure the side of the strip aligns with the + symbol.Close Snap the wire clip shut. Gently pull on the wire to confirm you've secured the strip inside the connector. If you need to solder it with light strip cable, you had better use less tin in order to avoid short circuit.

PACKAGE:10 x 10MM 4Pin For 5050 SMD RGB led strip Non-Waterproof. MAKE SURE you put the led strip under the pins and not on top. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side. If you have any issues, inquiries or need assistance, please feel free to contact us directly. 30-day money-back guarantee for any reason, 12-month warranty for quality-related issues.