AspenTek 2835 LED Strip Light Connector Adapter 2 Pin Connector for Single Color Non-Waterproof SMD 2835 3528 Led Light Strip with 8mm Wide PCB Board
$15.98
$15.98
For Bulk orders
- Features
- Description
- Similar Items
Suitable for 2835 3528 single color led light strip with 8mm wide pcb board
Connector type:2pin 22 AWG copper wire (Internal);Plastic shell (external):made of PBT material with heat resistant, anti-burning, NO fire hazard function
8mm wide;15cm length for every cable
Cut the strip on the cut line, splice the ribbon electrically with this jumper and bend the wires whatever angle you require
No need welding;easy to use
Connector type:2pin 22 AWG copper wire (Internal);Plastic shell (external):made of PBT material with heat resistant, anti-burning, NO fire hazard function
8mm wide;15cm length for every cable
Cut the strip on the cut line, splice the ribbon electrically with this jumper and bend the wires whatever angle you require
No need welding;easy to use
Binding:
ElectronicsBrand:
AspenTekEAN:
0799491677586Label:
AspenTekManufacturer:
AspenTekModel:
AT-2PIN-8MM-3528Size:
8mm led strip connectorWarranty:
AspenTek solder-less connector is an idea way to link two pieces of LED strip lights together and save the time consuming task of soldering. The plastic connectors on either end of the wire simply open up and allow 3528 single led light strip to be inserted, once closed they provide a strong connection which will provide power to the LED strips.
Intended use:It mainly fits non-waterproof 3528 2835 single LED strip with 8mm wide circuit board. Such as cool white, pure white, warm white, blue, red, green, etc.
Installation:
Ensure your section of LED light strip has two welding spots (+ and -) and the contacts are both clean
Open the white clasp of the connector
Slide LED strip light into the clasp. Make sure + and - on the strip aligned to the + and - on the clasp.
Close the clasp and gently pull on the LED light strip to make sure you've made a solid connection.
Tips:
-This connector is mainly used for conductive connection. If it is not easy to be fixed in some place, please do the soldering.
-To connector waterproof led strip light, it will add an additional job for you. Please clean up the the rubber to make sure the soldering points of the light is clean, then insert it into the connection box
- If the PCB board is too thin, you may fix a little tape or a small piece of masking to make the PCB board enough thick, thus the light could be connected firmly.
Package content:
10 x LED Strip light connectors
Service Information:
In terms of product details or questions, please first contact our customer service center by email.